Hardware Function
 

Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.
Software Function
 

Support local and remote management
Support Console, WEB and SNMP management
Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version
View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
Support remote loop back function, three loop back position selectable. Help to find out the line fault conveniently
Summarize the data flow information and show the communication state of each port
Support SNMP management. Set Trap Destination and Community Name, including the authority
Reset the system or a single module or the remote end device via management software
Reset chassis to factory default
Support online firmware upgraded
Show the detailed information of power supply, including AC/DC type and running status
Provide MIB file, make it easy to be integrated into the third party SNMP management software
Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it's very easy and clear to manage all devices even if many chassis in one window.
Technical Specification
 

Device Size
Standalone: 132mm (width)*36mm (depth)*122mm (height)
19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
Power
AC: 220VAC+-20%, 50/60Hz
DC: -40~-57 VDC
Power consumption: Standalone < 3W, Chassis full of modules < 50W
 
 
Typical Order Information
 
 
V2-M32CA Multimode 1310nm, SC/PC, Standalone, 220VAC power supply
V2-M31CD Multimode 850nm, SC/PC, Standalone, -48VDC power supply
V2-S3042CA Singlemode 1310nm, 40Km, SC/PC, Standalone, -48VDC power supply
V2-S3082CA Singlemode 1310nm, 80Km, SC/PC, Standalone, 220VAC power supply
V2-S3042TM Singlemode 1310nm, 40Km, ST/PC, Module
V2-W3042CA Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Standalone, 220VAC
V2-W3043CA Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Standalone, 220VAC
V2-W3042CM Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Module
V2-W3043CM Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Module

For more order models, please contact us.